Special Film Line
parameter：Specification of the Line
thickness：50~200μm
width：4200mm
diameter：None
speed：150m/min
Longitudinal tensile ratio：None
Transverse tensile ratio：None
Annual output：5000T/Y
Introduction
Biaxially stretch geogrid production line
Geogrid is used in construction and road construction to bind the soil within a certain range for reinforcement. Bidirectional tensile plastic grid is in the extrusion of the polymer plate (mostly polypropylene or high density polyethylene) punching, and then under the heating condition of directional stretching, after stretching formed with square or rectangular polymer mesh material. Due to the manufacture of plastics geogrids in polymer polymer and rearrange the directional extend along with the heating process, strengthen the binding force between the molecular chain, achieve the purpose of improve its strength, widely used in all kinds of embankment and subgrade reinforcement, reinforcement, slope protection, the cave walls large airport, mines, port freight yard of permanent bearing foundation reinforcement.
Biaxially oriented PTFE film production line
PTFE fine powder is fully mixed with additives into the extruder, the powder is pushed out of the strip PTFE, and then calendered into a film under the roller. After heating and removing the additives, it can be stretched longitudinally and longitudinally, and the biaxial oriented microfiltration membrane can be obtained through heat treatment setting, cutting and winding. Polytetrafluoroethylene (PTFE) has excellent corrosion resistance, high and low temperature resistance, non-viscosity, weather resistance, etc., is widely used in atmospheric dust removal, sewage treatment and other fields.
Phone：0773-5888101/5888287 13978399116/18107733692
Fax：0773-5888287
mail：[email protected] [email protected]
Address：No.1 Yingcai Road, Qixing District, Guilin,Guangxi,541004, P.R.China
Postcode：541004
